Audioarts HS-1 headphone and TS-1 talent stations are the go-to for quickly adding guest, news or producer positions to any professional studio.
Compact and made to broadcast quality standards, both provide clean amplification with ultra-high-performance ceiling for ruler-flat frequency response ((± ½ dB @ 50kHz) and 115 dB dynamic range through any microphone. Both take all headphone types, whether it’s a 16 ohm headphone with mini stereo jack or 600 ohm headphone with ¼ inch jack, and connect to any analog console through standard RJ45 for convenient switching between program, audition and on-air feeds.
The Audioarts TS-1 talent station delivers clean amplification with a wide dynamic range and ruler flat frequency response. It is equipped with a high-gain headphone amplifier, 1/4” and mini stereo output jacks, two panel switches with internal LEDs, a power light, and a level control. The TS-1 features an internal HI/LO gain switch to accommodate a wide range of input types, logic on RJ45 connector for utilizing the two front panel switches for talkback and cough, and standard RJ45 analog audio pinouts for inputs/outputs. The output feed allows for daisy-chaining the unit’s source audio to other devices. The TS-1 comes with a separate power supply, and its wiring is managed through cutouts in the bottom of the unit.
The HS-1 is a powerful headphone amp in a mere 2-3/4″ by 3-3/4″ unit. Like the TS-1, it delivers clean amplification with a wide dynamic range and ruler flat frequency response. The front panel features a 1/4″ output phone jack, power LED, and rotary level control. An internal HI/LO gain switch allows it to match a wide range of input types. Rear connectors include dual RJ45 parallel inputs and a 9VDC power input that, like the TS-1, multiplies voltage and current to provide full sound to headphones of virtually any impedance. The unit comes with an input cable and a special 9VDC negative center pin power supply. The Audioarts HS-1 can be used as a free-standing unit or mounted underneath a counter with an optional bracket.
TS-1
HS-1
GAIN: +5dB LO setting, +14dB HI setting
DISTORTION:
THD+N .003%
IMD .005%
SMPTE DIN .001%
NOISE: -95dBu 20KHz BW, unweighted
MAXIMUM OUTPUT:
voltage +20dBu
power 180mW
current 65mA
MAXIMUM INPUT LEVEL: +26dBu
DYNAMIC RANGE: 115dB
CMRR: 80dB
WEIGHT: 4oz/113g
DIMENSIONS: 2.75”/6.98cm wide, 0.95”/2.41cm high, 3.125”/7.94cm deep (rotary knob adds 0.625”/1.59cm)
UNDERCOUNTER BRACKET: 3.9”/9.91cm wide, 2”/5.08cm deep, 0.97”/2.46cm high
GAIN: +5dB LO setting, +14dB HI setting
DISTORTION:
THD+N .003%
IMD .005%
SMPTE DIN .002%
NOISE: -92dBu 20KHz BW, unweighted
MAXIMUM OUTPUT:
voltage +20dBu
power 650mW
current 120mA
MAXIMUM INPUT LEVEL: +26dBu
DYNAMIC RANGE: 112dB
CMRR: 80dB
DIMENSIONS: width 5.4”/13.7cm, height 1.8”/4.6cm, depth 3”/7.6cm
WEIGHT: 10oz/.28kg
This optional bracket secures the HS-1 underneath a countertop using four screws. A mounting template with dimensions and recommended hardware callout is included in the box.
If you have a Wheatstone, Audioarts, or VoxPro product, you’re an important member of the Wheatstone family and we want to hear from you, whether you have questions or need technical support, we are here for you.
Company
600 Industrial Dr.
New Bern, NC 28562 USA
Main office +1 (252) 638-7000
Fax main office +1 (252) 637-1285
We are open Monday through Friday,
8:30 AM to 8:30 PM EST
Company
600 Industrial Dr.
New Bern, NC 28562 USA
Main office +1 (252) 638-7000
Fax main office +1 (252) 637-1285
We are open Monday through Friday,
9:00 AM to 5:30 PM EST