Heaven Forbid You Forget the Elevator.
V6N7 8.15.15
It’s easy to lose track of the many details of a new studio project. Let us take a moment to remember Edificio Intempo, the 47-floor skyscraper built in Spain that was said to be missing one important detail. Elevators.
Heaven forbid you should forget the elevator.
Yet, we see it time and again, studios that are missing that very important something. It could be the way the facility is laid out or how it’s connected together. It could be the absence of some seemingly insignificant detail or a trend that has gone terribly wrong.
The good thing about being in the audio network and console business is that we get to tour more than our share of broadcast studios from around the world. Our Director of Sales Jay Tyler has been in no less than 3,000 broadcast studios in his 20+ years at Wheatstone, and he has seen it all. Here are a few things Jay, along with Studio Technology’s Vince Fiola, who builds broadcast studio furniture, has noticed lately.
Camera automation. More and more on-air studios have a camera or two to run show video out to YouTube or other social media. Jay tells us that many of the larger studios have fulltime video editors onsite at the studio, while others are taking advantage of automation software to run those cameras. For example, multiCAM automation is being integrated with the WheatNet-IP audio network to switch the camera to the host or guest position in the studio whenever a mic is turned on. If the announcer’s mic is on, WheatNet-IP tells multiCAM to point the camera at the announcer position and then when a guest mic turns on, the WheatNet-IP tells multiCAM to switch to the guest position.
Downsized space. Technology is getting smaller and smaller, and that goes for devices as well as studios. It’s not unusual to see studio facilities scaled down, some by as much as half. Gone are the racks and racks of DAs and relays, thanks to IP audio routing and control.
Talent on the move. Who knew that talent had legs? They’re no longer confined to one studio, or even the studio facility. Mix-minus, bus minuses, mic presets and even video follows talent and shows no matter where they are located on the audio network.
Signs of the times. Signage in studios is one of the biggest trends this year, according to Jay. He’s seeing more and more clocks with metering on the wall, video feeds of talent shown in the lobby, and music playout schedules from the automation showing up on the studio wall or elsewhere in the studios. All this visualization is made possible because of the easy IP routing of media and data throughout the facility. Tight integration of AoIP systems like WheatNet-IP with virtual clocks such as VClock by Voceware helps, too.
Showcase looks. With so many morning shows now syndicating with the local TV station, there’s a lot more attention being paid to how the studio looks. There’s way less clutter, more open space and less wiring everywhere. Broadcasters are recessing monitors, lowering mic booms and adding polish with better lighting – at least in one studio. “More is being put into the main studio as the showcase, and the rest of the facility is getting much, much smaller and less expensive,” says Vince.
Soundcards are out. “That soundcard that fit your 10-year-old computer doesn’t fit the newer computers,” says Jay. Broadcasters are going with audio drivers instead, which can save a couple thousand dollars per studio.
Production in a workstation. The production studio has seen the most changes. “Here, you’re likely to see a creative guy that sits at the computer all day,” says Vince. Production studios have become more computer workstation centric with more compact, more capable IP consoles or control surfaces. Our E-6 control surface, for example, has become more computer friendly by providing console control and programming on a display monitor, and newer Audioarts consoles like the Air-5 come with USB connectivity and/or Bluetooth compatibility for smaller production studios.
More control. The modern studio gives you far more control. One Ethernet cable is all it takes to bring up any source along with control commands. Jay says there is a lot of interest in our IP networked TS-22 talent station because in one small talent station sitting, you can control mic on/off, talkback, muting, source selection and headphone amp all through an Ethernet cable with POE.
Better workflow. IP audio network integration with editing systems such as VoxPro makes it so much easier to do live telephone editing, on the fly, all on one cable – audio and control. Plus AoIP integration with things like codecs means you don’t need analog inputs and outputs.
Software flexibility. Virtual console control and other software apps are making studios much more flexible. For example, says Jay, “With our new Screen Builder app, and a terminal, I can replace a whole intercom panel with a soft panel. I can build intercoms and talkbacks and mix minuses and on the fly mixes with a software application where I used to pay thousands of dollars in hardware.”
Energy efficiency. According to Jay, “You can plug in an electric space heater and it’s going to use more juice than a big pile of Wheaty gear.”
Really, really, really cool break rooms. We’re taking hammocks and bubble chairs, beer on tap, a wine rack maybe, and don’t forget the putting green, air hockey table and gaming workstation – all the necessities for improving productivity. Okay, so this isn’t exactly a trend we’ve seen in our travels, but we’ll keep looking.